KEasyKVM
Guide

How to use two computers with one monitor

Two computers on one desk, or two laptops, and one good monitor between them. You can share it four ways: the monitor's own input button, a hardware KVM switch, software that shares the keyboard and mouse, or a software KVM that switches the monitor and moves the keyboard and mouse with one hotkey. Here is what each one takes, and where each one falls short.

Start 3-day trial Buy — $29.99

First: one monitor, two inputs

Every way below starts the same. The monitor needs two inputs, and each computer gets its own cable. The inputs do not have to match: one computer on HDMI and the other on DisplayPort or USB-C is fine. Most monitors made in the last ten years have at least two. The monitor shows one input at a time, and switching between them is the whole job.

1. Press the monitor's input button

Free and already on your desk. Plug both computers in, then pick the input from the monitor's menu when you want the other one. The catch is everything else: the keyboard and mouse are still plugged into the first computer, so you need a second set, or you move the USB cables too. And the input menu takes several presses on most monitors, so after a week you stop switching.

2. A hardware KVM switch

A box that both computers, the monitor, the keyboard and the mouse plug into. One button moves all of them. It works without software, but the ports have to match your computers and your monitor, high refresh rates and 4K cost extra, and USB devices reconnect on every switch. With laptops you also add cables and a power brick to the desk. The details are in KVM switch for two computers.

3. Keyboard and mouse sharing software

Tools like Synergy, Barrier and Mouse Without Borders send the keyboard and mouse over the network: you push the cursor off one screen and it appears on the other. That assumes a screen per computer. With one shared monitor there is no second screen to push the cursor onto, and the tool never changes the monitor's input, so you are back to the input button. More in hotkey vs mouse-edge switching.

4. A software KVM: one hotkey for all of it

EasyKVM runs on both computers. Press Ctrl+Alt+Q and the monitor changes input over DDC/CI, the same command the monitor's buttons send. Your keyboard, mouse, clipboard and system audio move to the other computer over your home network. Press it again and you are back. No box, no extra cables: each computer drives the monitor through its own cable, so nothing is streamed and the picture is the computer's own.

Pair the two once with a 6-digit code. The computer with the keyboard and mouse plugged in is the host and holds the license; the other one joins without a license or an account.

Which pairs switch the monitor automatically

Your two computersMonitor switchKeyboard, mouse, clipboard, audio
Two Windows PCs or laptopsAutomatic, on the hotkeyShared
A Mac and a Windows PCAutomatic, on the hotkeyShared
Two MacsBy hand, with the monitor's input buttonShared

The automatic switch needs a monitor that accepts DDC/CI, which most made after about 2015 do. Some docks and adapters block it. The trial shows whether yours works in a few minutes, and the troubleshooting page covers the usual causes when it does not.

Two laptops on one monitor

Laptops add three things to think about.

A work laptop next to your own computer is the most common version of this desk; it has its own guide: work laptop and personal computer on one monitor.

The four ways side by side

WaySwitchingKeyboard and mouseCost
Monitor's input buttonMenu presses, by handA second set, or move the cablesFree
Hardware KVM switchButton on a boxSwitched by the boxA box and cables per port
Keyboard-sharing softwareMonitor by handShared, by mouse edgeFree to paid
EasyKVMOne hotkeyShared, follows the hotkey$29.99 once

FAQ

Can I use two laptops with one monitor?
Yes. Connect each laptop to its own input on the monitor, by HDMI, DisplayPort or USB-C. To switch, press the monitor's input button, or use a software KVM like EasyKVM so one hotkey switches the monitor and moves the keyboard and mouse too. Two Windows laptops, or a MacBook and a Windows laptop, switch the monitor automatically. Two MacBooks share the keyboard and mouse, but you press the monitor's input button yourself.
Does my monitor need two HDMI ports?
It needs two inputs of any kind, not two of the same. One computer on HDMI and the other on DisplayPort or USB-C works just as well. Check the back of the monitor or its manual for the list of inputs.
Can I see both computers on the screen at the same time?
Not with input switching: the monitor shows one input at a time. Some monitors have a picture-by-picture mode that splits the screen between two inputs; check the monitor's menu. Otherwise, seeing both at once means a second monitor.
Do both computers need a keyboard and mouse?
No. With EasyKVM the keyboard and mouse stay plugged into one computer, the host, and the hotkey forwards them to the other over your home network. A closed laptop in a dock needs only power and the monitor cable.
Does it work over Wi-Fi?
Yes. Both computers need to be on the same network, and Wi-Fi is fine. Input latency is under 50 ms on a typical LAN; wired is snappier. Nothing is streamed: each computer drives the monitor through its own cable.

Try it on your own desk

Install on both computers, pair, press the hotkey. The trial is three days, full functionality, no card, and it shows whether your monitor accepts the input switch before you pay. $29.99 once for both platforms, 14-day refund.

Start the free 3-day trial Buy EasyKVM — $29.99 once

One-time payment · 3-day free trial · 14-day refund, no questions